QuickAir – decentralised domestic ventilation

What is a QuickAir ventilation?

The QuickAir domestic ventilation is a decentralised ventilation system and contributes to a healthy room climate. With its heat recovery of up to 90%, it works very energy efficient and will make sure that very little heat is lost.

Thermal insulation and ventilation

Thermal insulation such as exterior insulation ensures a lower air exchange and thus increased humidity and pollutant concentration. This can lead to damp walls and mould growth and therefore health risks. To avoid these risks, rooms need to be ventilated.

The disadvantages of ventilation

Even frequent manual airing can hardly provide a sufficient air exchange. The biggest drawback of this solution are the high heat losses during winter, because along with the stale room air, the heat is also led outwards. Furthermore, regular manual ventilation also requires a certain degree of discipline, thus we can also call it random ventilation.

The benefits of controlled domestic ventilation

This process is automated with a technical solution like the QuickAir domestic ventilation: stale air, heat loss and forgetting of the airing are things of the past. As another gain in comfort, the controlled domestic ventilation also serves as noise protection, because street noise no longer drifts through the open windows.

Uo to 90% heat recovery

During the exhaust phase, the spent air is directed to the outside, while the integrated heat accumulator absorbs its heat. During the air feed phase, fresh external air is led into the room while the heat accumulator emits the previously stored heat. In this way, a heat recovery of up to 90% is achieved. In the summer, the heat accumulator can be deactivated, thus cooler exterior air is led into the room at night.

Efficient joint operation

In order to ensure a proper cross-ventilation, the QuickAir domestic ventilation should be operated in pairs. This also prevents positive and negative pressure. A QuickAir controller can control op to six units and thus three pairs.

Retrofitting without complex ducts

Common ventilations require a complex duct system and are mostly used in new buildings. Herkömmliche Lüftungen verfügten über ein komplexes Kanalsystem und werden daher zumeist im Neubau eingesetzt. They can be retrofitted only with great effort, this is hardly possible in old buildings. A decentralised QuickAir ventilation, however, can be installed seperately for each room.

Low maintenance

In conventional ventilation ducts, residues such as dust and lint gather in the course of time, their removal requires great effort. This is eliminated when using a decentralised ventilation: heat accumulator and filter can easily be removed, cleaned and replaced. Furthermore, the QuickAir room ventilation has a built-in slope, so that condensate is always led outward.

Technical data at a glance

Air output	15 \| 20 \| 30 \| 40 m³/h
Degree of efficiancy of the heat accumulator	bis 90%
Power consumption	0,8 \| 1,1 \| 1,7 \| 2,7 W
Sound pressure level (3m)*	12 \| 18 \| 22 \| 30 dB(A)
Filter class	G3, regenerierbar

Did we convince you?

You can quickly and conveniently order QuickAir domestic ventilation in our online shop. You can find the domestic ventilation as well as underfloor heating systems, wall heating systems and load distribution layer at the QuickTec-Shop.
QuickTec – Your shop underfloor heating, wall heating and ventilation systems.

The QuickAir ventilation is a decentralised and controlled domestic ventilation system which can be installed separately for each room. The integrated heat accumulator stores heat during the exhaust phase and emits this heat during the air feed phase. In this way, only little heat is lost, a heat recovery of up to 90% is ensured. Heat loss caused by manual airing is eliminated. Frequent airing gets more and more important in in highly insulated buildings with thick exterior insulation and triple glazing: houses become more and more air-tight, thus humidity and risk of mold are rising. Common ventilation systems are difficult to retrofit because the require complex duct systems. A decentralised domestic ventilation such as the QuickAir ventilation can be installed seperately for each room and doesn't need comlex pipe ducts. This also makes maintenance easier. QuickAir is easy to maintain, filter and heat accumulator can be easily removed. QuickAir is another product by QuickTec and is sold in the QuickTec-shop. The QuickTec-shop also offers underfloor and wall heating systems and load distribution layers.

QuickAir ventilation

Perfect feel-good climate

QuickAir – Decentralised domestic ventilation with up to 90% heat recovery

High energy efficiency

Feel-good climate

Perfect for retrofitting